Theresa Arzadon-Labajo | ||||||||
Menu:
Powered by Website Baker |
Port 1 connected to DVI. Port 2 connected to VGA on KVM. At first, with the default xorg.conf, the machine would boot on the DVI port, then switch to VGA port when the gui started. I wanted the gui to be on the DVI port. First, I ran nvdia-settings Under "X Server Display Configuration", Under Display, I chose Configuration to be "Separate X Screen" with Resolution of "1920x1200", then "Save to X Configuration File" This didn't seem to make a difference. I edited the new xorg.conf: Under "ServerLayout", I added: Screen 0 "Screen0" LeftOf "Screen1" Screen 1 "Screen1" 0 0 Option "Xinerama" "on" Option "Clone" "off" Under "Module", I added: Load "nvidia" (but I don't know if this is really needed) Under "Videocard0", I added: Option "ConnectedMonitor" "DFP" The rest of the configuration file looks like this: .... Section "Monitor" # HorizSync source: edid, VertRefresh source: edid ### Comment all HorizSync and VertSync values to use DDC: Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 2407WFP" ### Comment all HorizSync and VertSync values to use DDC: HorizSync 30.0 - 83.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid ### Comment all HorizSync and VertSync values to use DDC: Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 2407WFP" ### Comment all HorizSync and VertSync values to use DDC: HorizSync 30.0 - 83.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Videocard0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 285" Option "ConnectedMonitor" "DFP" Option "AddARGBGLXVisuals" "True" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Videocard1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 285" Option "AddARGBGLXVisuals" "True" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 Option "metamodes" "CRT: 1920x1200 +0+0; CRT: 1280x1024 +0+0" SubSection "Display" Depth 24 Modes "1900x1200" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Videocard1" Monitor "Monitor1" DefaultDepth 24 Option "metamodes" "DFP: nvidia-auto-select +0+0" SubSection "Display" Depth 24 Modes "1900x1200" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" EndSubSection EndSection After rebooting, the gui was on the DVI port. Last changed: Sep 25 2007 at 9:05 AM BackComments
Add Comment |
|||||||